Hydraulic Self Erect System: Includes a 13 HP power pack with 80 gallon reservoir, four transport-friendly landing leg corner cylinders, two main bin cylinders, two mixer charge chute cylinders, and two mainframe support section cylinders. The landing legs are controlled by individual manual valves. Bin, charge chute, and support cylinders are controlled by a pendant control. With a reputation for high production and mixing efficiency, RexCon Central Mix Concrete Batch Plants are ideal as portable paving plants for major infrastructure projects or for portable ready mix production. When high production and portability are critical, you can trust that the Mobile 12 SE-CM will get the job done. With its self-supporting sub-frame and superior self-erect hydraulic system, this plant features fast setup times. Low profile mobility, reliability, and high performance make the Mobile 12 SE-CM the plant to own.

Aggregate Section: 12 cubic yard batcher with 66 ton, four compartment fold-up aggregate bin with quick pin connections on exterior of bin and slide-in/bolted divider walls.
Batch Belt Conveyor: 48” wide, 3-ply belt with vulcanized splice and 50 HP drive. Belt operates at 680 FPM.
Cement Section: Two each 150 bbl. (28 ton) compartments with 5” fill pipes and long lasting low wear elbows. Two 12” dia. screws powered by 50 HP direct drives. Includes sealed inspection hatch with high and low bin signals.
Accumulative Batchers: Compression load cells and telescoping calibration arms. • Tilt Mixer: 12 yard portable tilt mixer with self-erect hydraulic system.
High Pressure Air System: 20 HP air compressor with 120 gallon tank. All batcher gates are controlled by double acting sub-base mounted solenoids.
Low Pressure Air System: 4.6 HP regenerative type blower with individually adjustable bin flow pads.
Water System: 3” mag meter, 3” mag temper meter and 15 HP water pump case.
Transportation Gear: King pin, spring suspension, triple axles, radial tires, brakes and signal lights.
Power Panel: NEMA dust tight steel enclosure with single lockable main disconnect switch. Across the line starters are provided for all factory installed motors. All wiring is plug and cord.

Recommended Rexcon Model 12-SE CM Spare Parts List