|
Used Pumps
$420.00 - Bell & Gossett Pump Model 1535C 1 ¼” suction ¾” discharge, 1 ½ hp, 230/460 volt 3 phase, 3450 rpm , TEFC motor. This is a new pump that was installed, never used, and removed. Pump is capable of 50 GPM @75Ft of Head pressure.
Plus applicable tax and freight
$650.00 - Bell & Gossett Pump Model# 1535C 2” suction 1 1/2” discharge, 5 hp, 230/460 volt 3 phase, 3450 rpm , TEFC motor. This is a new pump that was installed, never used, and removed. Pump is capable of 200 GPM @70Ft of Head pressure.
Plus applicable tax and freight.
$740.00 - Berkley Pump Model DMJ 2.5” suction 2” discharge self priming, 5hp, 230/460 volt 3 phase, 3450 rpm , TEFC motor. This is a new pump that has never been used, this pump is the same model that was used as a circulation pump for Pearson PH-720 and PH-1050 chillers. Pump is capable of 160 GPM @85Ft of Head pressure.
Plus applicable tax and freight.
$750.00 - MP Pump Model Chemflo5 2” suction 1 ½” discharge, Stainless Steel Pump housing. 5 hp 230/460 volt 3 phase, 3500 rpm, TEFC motor. This is a rebuilt pump with low hours and all new seals. This is the same pump once used as truck fill pumps on Pearson Heating tanks. Pump is capable of 145 GPM @ 60 Ft of Head pressure.
Plus applicable tax and freight.
$680.00 - Scot Pump Model #18SF 2.5” suction, 2” discharge, 5hp, 230/460 volt 3 phase, 3450 rpm , ODP motor. This is a rebuilt pump with low hours and all new seals, this pump is the same model that is used as a circulation pump for Pearson PH-560 thru PH-970 chillers. Pump is capable of 160 GPM @70Ft of Head pressure.
Plus applicable tax and freight.
|
